For the project of Tesla Shanghai Lingang factory, smart control device is required to monitor the state of all high-voltage cabinets in the power distribution cabinet in the distribution room. The requirements of the project are as follows:
1) A dynamic simulation diagram, electrical display and blocking;
2) Temperature and humidity control, LED display;
3) Switch on and off, energy storage, remote/local switch;
4) Voice prompt and human body induction;
5) Lighting operation in the cabinet;
RS485/ Modbus communication.
In order to meet the above requirements, we choose ASD200 smart control device. The external structure of Acrel ASD200 intelligent control device is as foll
For the 3 distribution rooms of the project, including energy center C2, joint workshop 4 and substation incoming isolation cabinets, there are totally 60 sets 10kV high voltage cabinets. Taking part of 10kV high voltage distribution cabinets as example, the products smart control device are shown in the figure below:
2.3 產品明細 Product detail
本次特斯拉工程使用智能操控裝置ASD200共計60只。產品介紹如下:
The smart control device ASD200 is used in this Tesla project, totaling 60 pcs. The product introduction is shown in the table below.
For large production enterprise power distribution project, in order to provide the safety and reliability of power supply, Acrel also launched the switchgear electrical connection point temperature monitoring products, you can real-time monitor copper platoon, cable, contained in the circuit breaker plum touch the top temperature of the electrical connection, convenient operation maintenance of the entire transformer room. The following is the selection scheme of electrical node temperature measurement products of switch cabinet.